Product ID:16-SN60-5XX, SOLDER CREAM
MSDS Date:01/07/1991
FSC:3439
NIIN:00N025623
MSDS Number: BPCTB

ESP SOLDER PLUS

14 BLACKSTONE VALLEY PLACE
LINCOLN, RI 02865
US

Emergency Phone: 401-333-3800

Info Phone: 401-333-3800

Cage: ESPSO

ESP SOLDER PLUS

LINCOLN, RI 02865 US

Telephone: 401-333-3800

Cage: ESPSO

ROSIN

CAS: 8050-09-7

Fraction By Weight: 3.4-6.9%

CYCLOHEXANOL

CAS: 108-93-0

RTECS: GV7875000

Fraction By Weight: 0-6.0%

OSHA PEL 50 PPM, S

ACGIH TLV: 50 PPM, S

TERPENES; (TERPENE MIXTURE)

Fraction By Weight: 0-5.6%

THIXOTROPIC AGENTS; (ORGANIC THIXATROPE MIXTURE)

Fraction By Weight: 1.0-3.8%

OTHER INGREDIENTS

Fraction By Weight: <1%

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 0-1.8%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 51-56.7%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 30.6-36%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGESTION OF LEAD ALLOYS IS
TOXIC AND WILL PRODUCE POISONING. BREATHING OF VAPORS MAY PRODUCE
RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:LEAD:GROUP 2B (IARC)
Effects of Overexposure:INHALATION OR INGESTION MAY PRODUCE NAUSEA,
VOMITING, HEADACHE, JOINT AND MUSCLE PAIN. MAY CAUSE DERMATITIS.
MAY IRRITATE EYES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:REMOVE CONTACT LENSES, IMMEDIATELY FLUSH WITH PLENTY OF
WATER FOR AT LEAST 15 MINUTES AND GET MD ATTENTION. SKIN: WASH
THOROUGHLY WITH SOAP AND WARM WATER. INHAL:REMOVE TO FRESH AIR.
INGEST:IF OVE R-EXPOSURE IS SUSPECTED, OBTAIN A MEDICAL EVALUATION
OF BLOOD LEAD LEVEL. SEEK MD ATTENTION.

Flash Point Method:COC
Flash Point:238F,114C
Extinguishing Media:DRY CHEMICAL, FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:IF LARGE QUANTITIES OF SOLDER ARE ON FIRE, USE
NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT , AS TOXIC
FUMES MAY BE EMITTED.
Unusual Fire/Explosion Hazard:FLUX IN SOLDER MAY BURN IF SOLDERING IS
DONE WITH A FLAME.

Spill Release Procedures:PUT INTO PROPERLY LABELED WASTE CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID STORAGE NEAR HEAT OR OPEN
FLAMES.
Other Precautions:NONE

Respiratory Protection:MAINTAIN ADEQUATE EXHAUST. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:USE LOCAL EXHAUST. OPERATOR SHOULD BE PROTECTED FROM
SOLDERING FUMES.
Protective Gloves:IMPERVIOUS RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:WASH HANDS THOROUGHLY PRIOR TO EATING, DRINKING
OR SMOKING. DO NOT SMOKE WHILE SOLDERING.
Supplemental Safety and Health
BP:FLUX - 255F (124C); ALLOY - >1125F (>600C). NOTE:LEAD CAS#7439-92-1
APPEARS ON THE NAVY LISTING OF OCCUP REPRO HAZ. SEEK CONSULTATION
FROM APPROP HEALTH PROFESSIONALS CONCERN LATEST HAZ LIST INFO A ND
SAFE HANDLING AND EXPOSURE RECOMMENDATIONS.

HCC:T6
Boiling Pt:B.P. Text:SUPP DATA
Melt/Freeze Pt:M.P/F.P Text:>354F,>179C
Spec Gravity:>4
Solubility in Water:% BY WEIGHT - 0
Appearance and Odor:GREY CREAM WITH A MILD SOLVENT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:NONE KNOWN.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. SOLDER MAY BE SENT TO A METAL RECLAIMER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.